3 host rip routing lab

From Cloonix wiki

Please create a cloonix lab to the following specification.

1. 3 routers, 2 vlans
2. router 1 - eth0 192.168.100.10/24 - eth0 vlan1
3. router 2 - eth0 192.168.100.20/24 - eth0 vlan1
4. router 2 - eth1 192.168.200.20/24 - eth1 vlan2
5. router 3 - eth0 192.168.200.30/24 - eth1 vlan2

on router01

• quagga.init start
• iptable -F
• iptables -P FORWARD ACCEPT
• vtysh
  • conf t
  • int eth0 192.168.100.10/24
  • router rip
  • network 192.168.100.0/24
  • ctrl-z

on router03

• vtysh
• conf t
• router rip
• network 192.168.200.0/24
• ctrl-z

router02 (make sure firewall / forwarding is enabled)

• vtysh
  • conf t
  • router rip
  • network 192.168.200.0/24
  • ctrl-z